#include <cs_config.h>

Include dependency graph for app_config.h:

Macros
#define	CS_DEFINE_LEGACY_NRF_DRIVERS_CONFIGS 0
	Author: Crownstone Team Copyright: Crownstone (https://crownstone.rocks) Date: 28 May, 2019 Triple-license: LGPLv3+, Apache License, and/or MIT. More...

#define	APP_SCHEDULER_ENABLED 1

#define	APP_TIMER_ENABLED 1

#define	APP_TIMER_CONFIG_OP_QUEUE_SIZE 40

#define	APP_TIMER_CONFIG_USE_SCHEDULER 1

#define	NRF_SDH_DISPATCH_MODEL 1

#define	FDS_ENABLED 1

#define	FDS_VIRTUAL_PAGES CS_FDS_VIRTUAL_PAGES

#define	FDS_VIRTUAL_PAGE_SIZE CS_FDS_VIRTUAL_PAGE_SIZE

#define	FDS_VIRTUAL_PAGES_RESERVED CS_FDS_VIRTUAL_PAGES_RESERVED_AFTER

#define	FDS_OP_QUEUE_SIZE 4

#define	FDS_CRC_CHECK_ON_READ 1

#define	FDS_MAX_USERS 2

#define	NRF_FSTORAGE_ENABLED 1

#define	NRF_FSTORAGE_SD_QUEUE_SIZE 4

#define	HARDFAULT_HANDLER_ENABLED 1

#define	APP_SCHEDULER_WITH_PROFILER 1

#define	NRF_LOG_ENABLED 0

#define	NRF_LOG_DEFERRED 1
	Log data is buffered and can be processed in idle. More...

#define	NRF_LOG_DEFAULT_LEVEL 4

#define	NRF_SDH_SOC_LOG_LEVEL 4

#define	NRF_SDH_BLE_LOG_LEVEL 4

#define	NRF_SDH_LOG_LEVEL 4

#define	NRF_LOG_USES_COLORS 1

#define	NRF_LOG_WARNING_COLOR 4

#define	NRF_LOG_USES_TIMESTAMP 0

#define	NRF_FPRINTF_ENABLED 1

#define	NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 1

#define	NRF_LOG_BACKEND_RTT_ENABLED 0

#define	NRF_LOG_BACKEND_UART_ENABLED 0

#define	NRF_LOG_BACKEND_UART_TX_PIN CS_SERIAL_NRF_LOG_PIN_TX

#define	NRF_LOG_BACKEND_UART_BAUDRATE 61865984

#define	BLE_DB_DISCOVERY_ENABLED 1

#define	NRF_SDH_BLE_ENABLED 1

#define	NRF_SDH_BLE_PERIPHERAL_LINK_COUNT 1

#define	NRF_SDH_BLE_CENTRAL_LINK_COUNT 1

#define	NRF_SDH_BLE_TOTAL_LINK_COUNT 1

#define	NRF_SDH_BLE_GATT_MAX_MTU_SIZE 69

#define	NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE ATTR_TABLE_SIZE

#define	NRF_SDH_BLE_VS_UUID_COUNT MAX_NUM_VS_SERVICES

#define	NRF_SDH_BLE_SERVICE_CHANGED 1
	For iOS, the absence of the service changed characteristic makes it always discover services. More...

#define	NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 2

#define	NRF_SDH_ENABLED 1

#define	NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 1

#define	NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 1

#define	NRF_SDH_BLE_STACK_OBSERVER_PRIO 1

#define	NRF_SDH_SOC_ENABLED 1

#define	NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 1

#define	CRC16_ENABLED 1

#define	CRC32_ENABLED 1

#define	COMP_ENABLED 1

#define	WDT_ENABLED 1

#define	NRFX_WDT_ENABLED 1

#define	NRFX_WDT_CONFIG_BEHAVIOUR 9

#define	NRFX_WDT_CONFIG_NO_IRQ 1

#define	NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64
	Settings below were missing from the sdk_config.h They're copied from some example sdk_config.h. More...

#define	NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1

#define	NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3

#define	SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 4096

#define	SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2

#define	SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16

#define	SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2

#define	SEGGER_RTT_CONFIG_DEFAULT_MODE 0

#define	NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64

Macro Definition Documentation

◆ APP_SCHEDULER_ENABLED

#define APP_SCHEDULER_ENABLED 1

◆ APP_SCHEDULER_WITH_PROFILER

#define APP_SCHEDULER_WITH_PROFILER 1

◆ APP_TIMER_CONFIG_OP_QUEUE_SIZE

#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 40

◆ APP_TIMER_CONFIG_USE_SCHEDULER

#define APP_TIMER_CONFIG_USE_SCHEDULER 1

◆ APP_TIMER_ENABLED

#define APP_TIMER_ENABLED 1

◆ BLE_DB_DISCOVERY_ENABLED

#define BLE_DB_DISCOVERY_ENABLED 1

◆ COMP_ENABLED

#define COMP_ENABLED 1

◆ CRC16_ENABLED

#define CRC16_ENABLED 1

◆ CRC32_ENABLED

#define CRC32_ENABLED 1

◆ CS_DEFINE_LEGACY_NRF_DRIVERS_CONFIGS

#define CS_DEFINE_LEGACY_NRF_DRIVERS_CONFIGS 0

Author: Crownstone Team Copyright: Crownstone (https://crownstone.rocks) Date: 28 May, 2019 Triple-license: LGPLv3+, Apache License, and/or MIT.

Use this config file to overwrite values in sdk_config.h.

The sdk_config.h is a copy of SDK_15-3/config/nrf52832/config/sdk_config.h

◆ FDS_CRC_CHECK_ON_READ

#define FDS_CRC_CHECK_ON_READ 1

◆ FDS_ENABLED

#define FDS_ENABLED 1

◆ FDS_MAX_USERS

#define FDS_MAX_USERS 2

◆ FDS_OP_QUEUE_SIZE

#define FDS_OP_QUEUE_SIZE 4

◆ FDS_VIRTUAL_PAGE_SIZE

#define FDS_VIRTUAL_PAGE_SIZE CS_FDS_VIRTUAL_PAGE_SIZE

◆ FDS_VIRTUAL_PAGES

#define FDS_VIRTUAL_PAGES CS_FDS_VIRTUAL_PAGES

◆ FDS_VIRTUAL_PAGES_RESERVED

#define FDS_VIRTUAL_PAGES_RESERVED CS_FDS_VIRTUAL_PAGES_RESERVED_AFTER

◆ HARDFAULT_HANDLER_ENABLED

#define HARDFAULT_HANDLER_ENABLED 1

◆ NRF_FPRINTF_ENABLED

#define NRF_FPRINTF_ENABLED 1

◆ NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED

#define NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 1

◆ NRF_FSTORAGE_ENABLED

#define NRF_FSTORAGE_ENABLED 1

◆ NRF_FSTORAGE_SD_QUEUE_SIZE

#define NRF_FSTORAGE_SD_QUEUE_SIZE 4

◆ NRF_LOG_BACKEND_RTT_ENABLED

#define NRF_LOG_BACKEND_RTT_ENABLED 0

◆ NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE

#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64

Settings below were missing from the sdk_config.h They're copied from some example sdk_config.h.

◆ NRF_LOG_BACKEND_RTT_TX_RETRY_CNT

#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3

◆ NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS

#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1

◆ NRF_LOG_BACKEND_UART_BAUDRATE

#define NRF_LOG_BACKEND_UART_BAUDRATE 61865984

◆ NRF_LOG_BACKEND_UART_ENABLED

#define NRF_LOG_BACKEND_UART_ENABLED 0

◆ NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE

#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64

◆ NRF_LOG_BACKEND_UART_TX_PIN

#define NRF_LOG_BACKEND_UART_TX_PIN CS_SERIAL_NRF_LOG_PIN_TX

◆ NRF_LOG_DEFAULT_LEVEL

#define NRF_LOG_DEFAULT_LEVEL 4

◆ NRF_LOG_DEFERRED

#define NRF_LOG_DEFERRED 1

Log data is buffered and can be processed in idle.

◆ NRF_LOG_ENABLED

#define NRF_LOG_ENABLED 0

◆ NRF_LOG_USES_COLORS

#define NRF_LOG_USES_COLORS 1

◆ NRF_LOG_USES_TIMESTAMP

#define NRF_LOG_USES_TIMESTAMP 0

◆ NRF_LOG_WARNING_COLOR

#define NRF_LOG_WARNING_COLOR 4

◆ NRF_SDH_BLE_CENTRAL_LINK_COUNT

#define NRF_SDH_BLE_CENTRAL_LINK_COUNT 1

◆ NRF_SDH_BLE_ENABLED

#define NRF_SDH_BLE_ENABLED 1

◆ NRF_SDH_BLE_GATT_MAX_MTU_SIZE

#define NRF_SDH_BLE_GATT_MAX_MTU_SIZE 69

◆ NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE

#define NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE ATTR_TABLE_SIZE

◆ NRF_SDH_BLE_LOG_LEVEL

#define NRF_SDH_BLE_LOG_LEVEL 4

◆ NRF_SDH_BLE_OBSERVER_PRIO_LEVELS

#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 2

◆ NRF_SDH_BLE_PERIPHERAL_LINK_COUNT

#define NRF_SDH_BLE_PERIPHERAL_LINK_COUNT 1

◆ NRF_SDH_BLE_SERVICE_CHANGED

#define NRF_SDH_BLE_SERVICE_CHANGED 1

For iOS, the absence of the service changed characteristic makes it always discover services.

◆ NRF_SDH_BLE_STACK_OBSERVER_PRIO

#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 1

◆ NRF_SDH_BLE_TOTAL_LINK_COUNT

#define NRF_SDH_BLE_TOTAL_LINK_COUNT 1

◆ NRF_SDH_BLE_VS_UUID_COUNT

#define NRF_SDH_BLE_VS_UUID_COUNT MAX_NUM_VS_SERVICES

◆ NRF_SDH_DISPATCH_MODEL

#define NRF_SDH_DISPATCH_MODEL 1

◆ NRF_SDH_ENABLED

#define NRF_SDH_ENABLED 1

◆ NRF_SDH_LOG_LEVEL

#define NRF_SDH_LOG_LEVEL 4

◆ NRF_SDH_REQ_OBSERVER_PRIO_LEVELS

#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 1

◆ NRF_SDH_SOC_ENABLED

#define NRF_SDH_SOC_ENABLED 1

◆ NRF_SDH_SOC_LOG_LEVEL

#define NRF_SDH_SOC_LOG_LEVEL 4

◆ NRF_SDH_SOC_OBSERVER_PRIO_LEVELS

#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 1

◆ NRF_SDH_STATE_OBSERVER_PRIO_LEVELS

#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 1

◆ NRFX_WDT_CONFIG_BEHAVIOUR

#define NRFX_WDT_CONFIG_BEHAVIOUR 9

◆ NRFX_WDT_CONFIG_NO_IRQ

#define NRFX_WDT_CONFIG_NO_IRQ 1

◆ NRFX_WDT_ENABLED

#define NRFX_WDT_ENABLED 1

◆ SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN

#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16

◆ SEGGER_RTT_CONFIG_BUFFER_SIZE_UP

#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 4096

◆ SEGGER_RTT_CONFIG_DEFAULT_MODE

#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0

◆ SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS

#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2

◆ SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS

#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2

◆ WDT_ENABLED

#define WDT_ENABLED 1

Macros